8-Ch SD High Performance Encoder ENC3184S

8-Ch SD High Performance Encoder ENC3184S

◆ Simultaneous MPEG-4 AVC and MPEG2 SD encoding
◆ PAL, NTSC, SECAM support
◆ Ultra-low bit rate and low delay encoding
◆ PCR correction and PSI/SI information creation
◆ Power failure memory recovery

Send Inquiry

Product Details

Overview

    ENC3184S a professional, Full-featured, Low latency MEPG-2&H.264/AVC advanced hardware compression solution, it helps to optimize bandwidth utilization in digital TV headend systems. Designed to deliver high quality video in a small amount of bandwidth, and allows efficient utilization of bandwidth constrained mediums such as Satellite, Terrestrial, Cable, IPTV Networks.

    ENC3184S supports PAL or NTSC or SECAM digital video and analog audio content encoding from Composite and SDI inputs in MPEG-2 and MPEG-4 AVC formats, with a variety of standard video resolutions simultaneously.By applying adaptive and motion compensated noise reduction technique, it provides best picture quality in a noisy 

environment which is suitable for both contribution and distribution applications. 

    ENC3184S is ideal for reducing the rack space required for SD program encoding for content source origination and distribution. All encoded programs are multiplexed to multi-program transport stream (MPTS) outputs on both ASI and IP. Additionally, single program transport stream (SPTS) outputs are provided for all inputs on the IP network output.  All settings are available via the front panel as well as web based network management system. It also provides 2 separate ASI input which can dramatically lowers the cost per channel for real time SD video encoding.


Features

◆Up to Eight high-quality Encoding channels per chassis (1-RU)

◆Simultaneous MPEG-4 AVC and MPEG2 SD encoding

◆PAL, NTSC, SECAM support

◆MPEG-1 L2/AAC audio encoding

◆Ultra-low bit rate and low delay encoding

◆Each Channel Video output bitrate range: 0.5~5.5 Mbps (MPEG-2): 0.25 ~ 5.5Mbps (H.264)

◆4:2:0 encoding profiles for high video quality

◆VBR/CBR Mode

◆Video aspect ratio support: 4:3, 16:9, 1:1 

◆Simultaneous outputs via IP, DVB-ASI 

◆Switchable Multiplexing MPTS and SPTS of  Output Mode 

◆IP output TS is in the form of UDP packet, support MPTS/SPTS mode; when "MPTS mode" is selected for DVB mode, IP and ASI can output TS simultaneously; when “SPTS” is selected for IPTV mode, only IP can output TS, and the ASI output TS cannot be used properly

◆Two seperate ASI multiplexing capabilities for cascading and multi-services

◆Feature to control picture appearance by adjusting Lightness, Contrast, Saturation, HUE, Image Horizontal Offset prior to encoding 

◆User-defined Volume Gain

◆PCR correction to accurately correct

◆PSI/SI information creation

◆Flexible configuration of a admin account and multiple sub accounts

◆Configurable  Alarm parameters, Real time Monitoring the Alarm and operating temperature in running device

◆Various video filters available to remove noise and improve the video quality

◆Forced air-cooling (left  to right side) 

◆Reboot in Web-GUI

◆Management via embedded Web server,local front panel 

◆Reliable: Hardware based for 24/7 operation

◆Power failure memory recovery


Application

ENC3184S ip video encoder .png

Inquiry